Flat automatic screw machine is simple in appearance, light in machine, suitable for screw installation. However, no matter how easy the device is to use, it should also be checked, maintained and cleaned regularly. If there are some common failures in the future use process, how should we gradually find out the problem points in the common problems and deal with the simple problems?

 

Automatic screw machine can not start: in this case, first check that the power supply is well connected. After all, power cable connectors can become loose during handling. Product configuration Civil power 220V normal use switching power supply. If it cannot be started, the power cable may be damaged.

 

Lock screw sliding tooth, floating lock: If the screw sliding tooth or screw floating lock, check whether the torque adjustment is not in place. If the torque is too high, it is easy to slide the teeth. If the torque is too small, a floating lock will appear. If the torque of the mechanical batch that automatically tightens the screw is normal, check whether the screw is replaced. Batch numbers differ from standard specifications.

 

Automatic screw machine alarm: The automatic screw machine feeder has an alarm function, the normal alarm condition is mainly the screw feed is insufficient, just add the screw can run normally. Screws encounter stuck materials in the arrangement process, general screws have foreign bodies or large screws, just take out the foreign bodies of the stuck materials.